Garage Door Garage Door Sensor Installation New Braunfels, TX
Our New Braunfels garage door sensor installation calls cluster around swollen, sticking wood doors in summer humidity, storm-driven debris and water in the tracks, corroded springs and cables in the humid air, and moisture-tripped openers and sensors after storms. We fix the cause on the first visit and back it for a decade.
Garage doors in Comal County live with a humid subtropical climate — long, hot, muggy summers, mild winters, heavy thunderstorms, and high year-round humidity. For New Braunfels that means watching for intense UV that degrades rubber weatherstripping, corrosion that creeps across hardware in the muggy air, and damp garages that pit galvanized parts over time; we factor it into every repair and every new-door spec.
New Braunfels homeowners usually call us about one of a few things: swollen, sticking wood doors in summer humidity, storm-driven debris and water in the tracks, corroded springs and cables in the humid air, and moisture-tripped openers and sensors after storms. We diagnose the real cause — not just the symptom — before quoting a flat rate.
Photo-eye safety sensors are required by UL-325 on every garage door opener manufactured since 1993. They detect obstructions in the door's path and either reverse the door (during close) or refuse to start (when activated). When sensors are misaligned, dirty, sun-blinded, or failed, the door either refuses to close at all or — worse — closes without sensing an obstruction. Our sensor installation service replaces failed sensors, realigns drifted brackets, cleans the eye optics, and verifies auto-reverse on a real obstruction test.
Replacement eyes are brand-specific (LiftMaster has a different connector and signal pattern than Genie). We stock the major brands and most legacy models. Brackets occasionally need replacement when corrosion has degraded them or impact has bent them. Bracket alignment is critical — eyes that are slightly off-aim trigger intermittent close failures that drive homeowners crazy.
Every visit ends with an obstruction test: a 1.5-inch (3.8 cm) tall object placed under the door at three positions across the opening. The door must reverse when it touches the object. This is the UL-325 baseline — if the door doesn't pass, the install isn't complete. We document the test results on the work order.
Signs you need garage door sensor installation
Door refuses to close from remote
Misaligned or dirty photo-eyes prevent close. The opener's status light usually blinks 10 times to indicate the photo-eye fault.
Door closes part-way then reverses
Photo-eyes detecting a phantom obstruction (often sun glare or insects). Realignment or shielding usually fixes.
Status light blinks 10 times
Universal LiftMaster code for photo-eye fault. Genie and Chamberlain have similar fault patterns.
Sensors visibly knocked out of alignment
Bumped brackets, lawn-equipment impacts, or vehicle contact all knock sensors out of aim. Realignment is a quick fix.
Older opener with no sensors
Pre-1993 openers don't have photo-eyes. Retrofit is possible on most models — and brings the door to current safety code.
Common causes & what we fix
Bracket misalignment
Brackets shift slightly from temperature cycling, vibration, or contact. Even a few degrees off-aim breaks the sensor beam.
Lens dirt or insects
Dust, spider webs, and insect carcasses block the infrared beam. Cleaning the lens often restores function.
Sun glare interference
Direct sunlight hitting the receiver lens can saturate the sensor and trigger false obstruction. Shielding or repositioning fixes.
Wire damage
Mice chew sensor wires; landscapers occasionally cut them. Replacement and re-routing fixes.
Sensor end-of-life
Photo-eye electronics fail at 10–15 years. Replacement is inexpensive and quick.
Our process
- Call or schedule online.Pick a 2-hour window. We confirm in under 5 minutes with the assigned tech's name and photo.
- On-site diagnosis. Free for most repairs; $39 diagnostic on minor service calls (waived if you proceed). You see the issue and the fix before we start.
- Flat-rate quote. Written estimate before any work. No hourly creep, no upsell pressure — techs are salaried, not commissioned.
- Same-visit fix. 96% first-call fix rate. We test the door with you before leaving and clean up everything we touched.
How much does garage door sensor installation cost in New Braunfels, TX?
How much does garage door sensor installation cost in New Braunfels? It starts at $99, and we quote the exact flat rate before touching a tool. Seniors (65+) and military save 10% on labor, and larger jobs qualify for 0% financing for 12 months.
Garage Door Sensor Installation the United States starts at from $99, and every quote for professional Garage Door Sensor Installation the United States is flat-rate and presented in writing before work begins — there are no surprise add-ons or hourly creep. Senior (65+) and military discounts of 10% off labor apply to all residential work. Financing through Synchrony is available on Garage Door replacement the United States projects over $1,500 at 0% APR for the first 12 months, with fast approval and no prepayment penalty.
Why homeowners in New Braunfels, TX choose us for garage door sensor installation
New Braunfels homeowners pick us for garage door sensor installation because we're genuinely local to Comal County — fast dispatch, familiar faces, and accountability that a far-off call center can't match. Family-owned since 1974, CSLB-licensed (#1098234), and 96% first-call fix rate.
Our Garage Door repair the United States work is backed for the long haul: the garage door sensor installationworkmanship guarantee is 10 years — separate from any manufacturer warranty on the parts themselves. If the install or repair we performed fails because of how we installed it, we return and fix it at no charge for a full decade. Springs rated for 30,000 cycles carry a lifetime warranty for the original homeowner. Parts and accessories carry standard 1–5 year warranties depending on the item; we'll explain exactly what's covered before we start any work, in writing.
Honest sizing and honest scope are the two principles that drive how we quote garage door sensor installation and every Garage Door installation the United States. We don't up-sell unnecessary work, our techs are salaried (not commissioned), and the diagnostic is structured so you see exactly what we see — including the parts that are still in great shape and don't need attention. If a repair is the right call, we recommend the repair. If replacement is the better long-term economics, we say so. Either way, the quote is flat-rate, written, and good for 30 days so you can compare and decide on your own timeline.
Areas we serve for garage door sensor installation
We provide garage door sensor installation throughout New Braunfels, TX and the surrounding Comal County area. Serving New Braunfels and surrounding neighborhoods.
Our coverage map centers on Comal County, where Comal County, Texas, takes in New Braunfels and the communities around it. New Braunfels and Lake Dunlap, McQueeney, Geronimo, and Cibolo are all on our daily routes.
New Braunfels and its neighbors Lake Dunlap, McQueeney, Geronimo, and Cibolo share one dispatch desk, so the closest tech always rolls.
Garage Door Sensor Installation near you in New Braunfels, TX
"Garage door sensor installation near me" should return a real neighbor, not a lead broker. We're local to New Braunfels and the surrounding Comal County area, with same-day availability across New Braunfels and the surrounding area.
We cover ZIP codes 78132, 78130, 78131, 78135 and the surrounding area. Reach times for Garage Door Garage Door Sensor Installation the United Statesvary by traffic and time of day; we'll quote an accurate ETA when you call. Our dispatch line routes directly to an on-call technician — there's no voicemail system between you and the person who'll be solving your problem.
Frequently asked about garage door sensor installation
Top questions homeowners searching for Garage Door Sensor Installation near me ask us: